Lemon 1M800 Hi-Gloss Acrylic Sheet

Custom Enquiry

Can't find what you are looking for? Please complete the below enquiry form, detailing as much information as possible, and we will get back to you.

  • Plexiglas® branded material
  • Enhanced high gloss surface finish on one side
  • Water resistant, ideal for kitchens and bathrooms
  • Co-extruded for exceptional depth of colour
  • Lightweight, only half the weight of glass
  • Stronger than glass and shatter resistant
  • Supplied with protective film on both sides
  • Colour samples available here



Providing a remarkable depth of colour, Plexiglas® Hi-Gloss acrylic delivers a noble appearance and special deep-view effect. Clear high gloss is co-extruded with a rear colour effect, allowing the colours to be even more vibrant and intense. With an excellent resistance to wet and dry conditions, this material is a popular choice for kitchen splashbacks and bathroom wall cladding. Plexiglas® Hi-Gloss can be cut, routed, drilled, thermoformed and polished.


I am using acrylic for splashbacks, can I use this behind my cooker or hob?

Acrylic will look great as a splashback in a kitchen or bathroom though we do not advise the use of standard acrylic behind cookers or hobs. The Plexiglas® Hi-Gloss range does however have a higher resistance to heat and therefore could be used behind a hob providing the following conditions are met:

1. The distance between the outer edge of a ceramic hob and the wall must be at least 60mm.

2. Distance between the outer edge of a gas hob and the wall must be at least 200mm.

3. The constant temperature remains equal to or below 105°C.


Acrylic can sometimes be referred to as Perspex®, Plexiglas®, Lucite®, Altuglas®, Acrycast® or Policril®. These are simply brand names of acrylic, much like Hoover® is with regards to vacuum cleaners.


Tolerance: Extruded acrylic has an industry standard thickness tolerance of +/-3%.


Do you have a question or not sure which material is right for you? Click here to learn more.


Different monitors and printers will have varying colour settings. Please order a sample if you are concerned about exact colour matches.

We aim to process, cut and dispatch standard orders within 4 working days. Orders with extras such as holes, rounded corners or cut-outs and laser cut shapes and letters will be dispatched within 6 working days. Once dispatched, delivery in the UK will usually take place within 1-2 working days. Should you have an urgent request, please contact us before placing your order.


Delivery leadtimes are subject to stock availability. In the unlikely event we are unable to deliver your order in time, we will contact you immediately, inform you of the delay and offer a revised due date. We will of course issue a full refund should the new due date be unsatisfactory.


Further delivery and returns information can be found here.