Bronze Acrylic Mirror 1600 Letters

Custom Enquiry

Can't find what you are looking for? Please complete the below enquiry form, detailing as much information as possible, and we will get back to you.

Please note, the letters will be cut as the sample text shown, with the overall height matching the tallest letter. For example, if your word is Plastic at 100mm high in Arial Rounded, the P and l will be 100mm high and the others will be shorter than 100mm but will be in the correct ratio to the sample text.
If you have a larger letter and one that hangs below the writing line, for example a k and a g, the overall height will from the lowest point to the highest point (from the top of the k to the bottom of the g).

If you are looking for a specific width, fitting templates or tape to be applied to the rear of the letters, we can still help. Contact us here to discuss your requirements.

  • Plaskolite® branded material
  • Gloss surface finish on face side only
  • Suitable for lasers able to cut extruded acrylic
  • Lightweight, only half the weight of glass
  • Stronger than glass and shatter resistant
  • Supplied with protective film on both sides
  • Colour samples available here

 

 

Mirror acrylic is a single sided lightweight and strong material with a reflective mirror backing. It boasts outstanding resistance to ageing, making the material an ideal alternative to glass for many applications. An extremely versatile material, acrylic is one of the most widespread plastics in everyday use. The material is used for arts and crafts, DIY projects, splashbacks, partitions, screens, wall protection, retail displays, signs and so much more.

 

Important: Please be advised that acrylic mirror is flexible therefore if the mirror is not 100% flat there will be a distortion in the reflection. If mounting to an uneven surface, we would advise that the material is first bonded/fixed to a flat surface like a solid piece of mdf or thick ply. When bonding, ensure the mirror adhesive is applied evenly.

 

Outdoor Use: The mirror backing can be affected from continuous exposure to moisture therefore we do not recommend acrylic mirror for outdoor use. If used outside, we would suggest the perimeter is sealed with a silicon sealant to help keep moisture out and protect the mirror backing. Salt spray can also have an adverse effect on the mirror backing.

 

Acrylic can sometimes be referred to as Perspex®, Plexiglas®, Lucite®, Altuglas®, Acrycast® or Policril®. These are simply brand names of acrylic, much like Hoover® is with regards to vacuum cleaners.

 

Tolerance: Extruded acrylic has an industry standard thickness tolerance of +/-3%.

 

Do you have a question or not sure which material is right for you? Click here to learn more.

 

Different monitors and printers will have varying colour settings. Please order a sample if you are concerned about exact colour matches.

We aim to process, cut and dispatch standard orders within 4 working days. Orders with extras such as holes, rounded corners or cut-outs and laser cut shapes and letters will be dispatched within 6 working days. Once dispatched, delivery in the UK will usually take place within 1-2 working days. Should you have an urgent request, please contact us before placing your order.

 

Delivery leadtimes are subject to stock availability. In the unlikely event we are unable to deliver your order in time, we will contact you immediately, inform you of the delay and offer a revised due date. We will of course issue a full refund should the new due date be unsatisfactory.

 

Further delivery and returns information can be found here.

Accessories

  1. As low as £1.44 £1.20
    View Item
  2. Price from: £10.86 £9.05
    View Item
  3. As low as £3.12 £2.60
    View Item
  4. As low as £1.98 £1.65
    View Item