See-Through 2 Way Acrylic Mirror Shapes

Custom Enquiry

Can't find what you are looking for? Please complete the below enquiry form, detailing as much information as possible, and we will get back to you.

  • Plaskolite® branded material
  • See-through mirror from one side to the other
  • Ideal for surveillance and theatre props
  • Gloss surface finish on both sides
  • Suitable for lasers able to cut extruded acrylic
  • Lightweight, only half the weight of glass
  • Stronger than glass and shatter resistant
  • Supplied with protective film on both sides
  • Rectangular & square frames have 2mm inner and 5mm outer radius corners
  • Colour samples available here

 

 

Two way see-through mirror acrylic allows a percentage of incident light to pass through, while reflecting the remainder. This allows for one side to be see-through whilst the other appears as a mirror. For the two way mirror to work, one side must be illuminated more than the other. The side that is illuminated will see a mirror reflection whereas the side that is darkened will be able to see through the mirror.

 

Important: Please be advised that acrylic mirror is flexible therefore if the mirror is not 100% flat there will be a distortion in the reflection. If mounting to an uneven surface, we would advise that the material is first bonded/fixed to a flat surface like a solid piece of mdf or thick ply. When bonding, ensure the mirror adhesive is applied evenly.

 

Outdoor Use: The mirror backing can be affected from continuous exposure to moisture therefore we do not recommend acrylic mirror for outdoor use. If used outside, we would suggest the perimeter is sealed with a silicon sealant to help keep moisture out and protect the mirror backing. Salt spray can also have an adverse effect on the mirror backing.

 

Acrylic can sometimes be referred to as Perspex®, Plexiglas®, Lucite®, Altuglas®, Acrycast® or Policril®. These are simply brand names of acrylic, much like Hoover® is with regards to vacuum cleaners.

 

Tolerance: Extruded acrylic has an industry standard thickness tolerance of +/-3%.

 

Do you have a question or not sure which material is right for you? Click here to learn more.

 

Different monitors and printers will have varying colour settings. Please order a sample if you are concerned about exact colour matches.

We aim to process, cut and dispatch standard orders within 4 working days. Orders with extras such as holes, rounded corners or cut-outs and laser cut shapes and letters will be dispatched within 6 working days. Once dispatched, delivery in the UK will usually take place within 1-2 working days. Should you have an urgent request, please contact us before placing your order.

 

Delivery leadtimes are subject to stock availability. In the unlikely event we are unable to deliver your order in time, we will contact you immediately, inform you of the delay and offer a revised due date. We will of course issue a full refund should the new due date be unsatisfactory.

 

Further delivery and returns information can be found here.

Accessories

  1. As low as £13.08 £10.90
    View Item
  2. Price from: £2.88 £2.40
    View Item
  3. Price from: £37.02 £30.85
    View Item
  4. As low as £2.10 £1.75
    View Item
  5. Price from: £2.28 £1.90
    View Item
  6. Price from: £1.68 £1.40
    View Item